三菱 手冊 三菱-手冊_MR-J3-B
所屬類別：三菱
>> 伺服驅(qū)動器和伺服電機(jī)
資料介紹：
3. To prevent injury, note the follow
CAUTION
Only the voltage specified in the instruction manual should be applied to each terminal, Otherwise, a burst,
damage, etc. may occur.
Connect the terminals correctly to prevent a burst, damage, etc.
Ensure that polarity (, ) is correct. Otherwise, a burst, damage, etc. may occur.
Take safety measures, e.g. provide covers, to prevent accidental contact of hands and parts (cables, etc.)
with the converter unit and servo amplifier (drive unit) heat sink, regenerative resistor, servo motor, etc.
since they may be hot while power is on or for some time after power-off. Their temperatures may be high
and you may get burnt or a parts may damaged.
During operation, never touch the rotating parts of the servo motor. Doing so can cause injury.
伺服放大器 MR-J3-10B
伺服放大器 MR-J3-200B
伺服放大器 MR-J3-100A
伺服放大器 MR-J3-500A
伺服放大器 MR-J3-100B
伺服放大器 MR-J3-40A
伺服放大器 MR-J3-40B
伺服放大器 MR-J3-20A
伺服放大器 MR-J3-500B
伺服放大器 MR-J3-700A
伺服放大器 MR-J3-60B
伺服放大器 MR-J3-70B
伺服放大器 MR-J3-350A
伺服放大器 MR-J3-70A
伺服放大器 MR-J3-350B
伺服放大器 MR-J3-700B
伺服放大器 MR-J3-60A
伺服放大器 MR-J3-20B
伺服放大器 MR-J3-200A
伺服放大器 MR-J3-10A
上一條：
下一條：相關(guān)下載
